Siding Services in Davis, Weber, and Salt Lake Counties

The more detail you bring to the estimate conversation, the more accurate the scope and the fewer surprises during the project. Useful inputs include:

• Photos of the affected areas — close-up shots of panel damage, trim deterioration, or moisture signs, plus full elevation photos showing the overall condition of each side of the house
• Current material — vinyl, fiber cement, engineered wood, natural wood, or stucco, if you know it. If not, a close-up photo of the panel profile is usually enough to identify it.
• Which elevations are involved — one wall, two walls, or the full house. Whether the damage is isolated or appearing on multiple sides.
• Moisture or rot concerns — soft spots behind the siding, musty smell, interior paint bubbling on walls that back up to the exterior, or visible mold or staining
• Trim and accessory condition — whether corners, window surrounds, door trim, soffit, or fascia are also damaged or need replacement alongside the panels
• Access conditions — landscaping, fences, decks, or structures close to the house that could affect scaffolding or lift placement, and the height of the walls involved
• Repair history — any prior patches, and whether matching the existing siding material, profile, and color has been a problem
• Project goal — whether you want a matched repair, a full replacement in the same material, or a material change

You do not need all of this before reaching out. A phone call or email with photos and a description of what is happening with the exterior is enough to start.

Siding work follows a sequence. Each phase depends on the one before it, and the order protects the wall assembly from moisture damage during the project.

Scope and estimate — The project starts with a conversation about what is happening with the exterior, what condition the siding and trim are in, and what role Cornerstone will fill. Photos and a description of the affected areas move this forward.

Material and access staging — Siding panels, trim, house wrap, flashing, and accessories are ordered and delivered. Scaffolding or lift equipment is staged if the walls require it. Landscaping and exterior features near the work area may need temporary protection or clearance.

Demolition — Existing siding, trim, and damaged components are removed. This is when conditions behind the cladding become visible — sheathing damage, missing house wrap, improperly installed flashing, or prior repair layers that were installed over existing problems.

Sheathing inspection and repair — Once the substrate is exposed, damaged or rotted sheathing boards are replaced. The goal is a solid, dry, flat surface for the new moisture barrier and cladding to attach to.

House wrap and flashing — The weather-resistive barrier is installed over the sheathing, lapped so upper layers shed water over lower layers. Flashing is installed at windows, doors, roofline transitions, and penetrations to direct water out of the wall assembly. This layer is what actually keeps water out of the wall — the siding panels are the first line of defense, but the house wrap and flashing are the last.

Trim and accessories — Corner boards, window and door surrounds, J-channel, starter strips, and transition pieces are installed before the panel field. These components frame the siding layout and manage water at every edge and opening.

Panel installation — Siding panels are installed from the bottom up, locking into the starter strip and lapping each successive course. Each panel is fastened according to the material manufacturer's specifications — vinyl requires room for thermal expansion, fiber cement requires specific nail placement and sealed cut edges.

Soffit and fascia — If included in the scope, soffit panels and fascia boards are installed at the eaves. Vented soffit panels are positioned to provide attic ventilation.

Cleanup and walkthrough — Debris, old materials, and fasteners are cleared. The finished installation is walked and inspected.

Responsibility boundaries: Cornerstone's role in coordinating or performing each phase depends on the project scope and the requested role. Coordination with roofers, gutter installers, window crews, or other trades is discussed during the estimate — not assumed.

Siding work often connects to adjacent exterior or interior service scopes. These pages cover related work:

Exterior and Outdoor Services — The parent category for siding services and all exterior construction, repair, and improvement work.

Roofing — The roof and the siding system meet at roof-to-wall transitions, where flashing connects the two envelopes. Roof replacement or repair often reveals siding and trim conditions at these intersections, and siding projects frequently expose flashing problems that connect to the roof edge.

Window and Door Services — Windows and doors are the highest-risk transition points in the cladding envelope. Flashing, trim, and sealant around openings are where most moisture entry behind siding begins. Siding replacement often includes updating the trim and flashing at every opening.

Gutter Services — Gutters mount to the fascia board at the roof edge. When fascia is replaced as part of a siding project, gutter removal and reinstallation are part of the sequence. Gutter performance also affects how much water reaches the siding and trim below.

Chimney and Fireplace Services — Chimney-to-wall transitions require specific flashing and trim treatment. Siding replacement on a wall with a chimney involves detailing around the chimney structure to maintain the moisture seal.

Masonry Services — Homes with mixed-material exteriors — siding on upper stories and masonry on lower — need transition detailing where the two materials meet. Masonry veneer, stone, and brick create specific flashing and trim requirements at the junction.

Deck and Patio Services — Decks that attach to the house connect to the exterior wall, and the ledger board connection is a common moisture entry point. Siding work near a deck attachment often involves re-flashing the ledger-to-wall transition.

Deck Services — Standalone deck construction and repair, including the structural connection to the house wall where siding and flashing intersect.

Concrete Services — Foundations, flatwork, and concrete surfaces adjacent to the house wall. Siding termination at the foundation line and clearance above grade affect how the bottom edge of the cladding performs.

Fence Services — Fences adjacent to the house can affect access for siding work and may need temporary removal during installation on the affected elevation.

Retaining Wall Services — Grade changes and retaining walls near the house foundation can affect drainage against the exterior wall, which influences how the lower courses of siding perform over time.

Asphalt and Paving Services — Driveways and paved surfaces adjacent to the house affect drainage and splash-back against lower siding courses.

Irrigation and Sprinkler Services — Sprinkler heads aimed at or near the house wall are a common source of moisture exposure on lower siding panels. Adjusting or relocating irrigation can prevent recurring cladding damage.

New Construction Projects — Siding installation on new homes and new structures, where the cladding goes on as part of the full construction sequence.

Interior Remodeling and Finish Services — When siding failure has allowed moisture into the wall cavity, interior damage — drywall staining, mold, paint failure — may require attention after the exterior is corrected.

Restoration, Waterproofing, and Structural Services — Broader envelope and structural work when siding damage is part of a larger moisture, waterproofing, or structural deterioration pattern.

All Services — Return to the full services overview to compare siding with other service families.